The program began in March 2010, and initial conversion work began in December 2013. The cost of converting 65 trucks, planned at four per quarter, is estimated at approximately $12.4 million. Our team has a real sense of pride in ownership – when we deliver equipment back to the Fleet, we’re confident that it’s going to work as required, in its intended operational environment.” “Because of that bond with the warfighter, there is a level of commitment that goes beyond just putting a new coat of paint on a piece of equipment. “Many of our team members have used support equipment like this on ships, so they understand what it means for Sailors to have the best tools we can give them,” Belcher said. Mike Belcher, FRC-ASE Director, is proud of his team’s contribution. Because of the placement of the new radiator, the P-25A is just slightly taller than its predecessor. Given that the fire truck is used on ships where space is a premium, the length and width must remain the same. We’re stripping the fire truck down to the bare chassis for corrosion control and rebuilding it back to new.” “The flight deck of a carrier is one of the worst environments on earth (for corrosion). “We’re bringing these vehicles in for a normal rework so we’re saving money by doing the modification at the same time,” Sands said. In addition to the engine change, new pumps, radiator, heat exchanger, power takeoff and other items were upgraded as well. The new engine also has a newer radiator in a different position. Part of the reason for the conversion is, due to environmental regulations, the original Detroit Diesel two-cycle engine is no longer available for the 15-year-old apparatus. There's also an intake, for connecting to the ship's mixed aqueous film-forming foam, or AFFF, system. It has three 20-pound Halon extinguishers and is equipped with a 500 gallons-per-minute (GPM) turret and 100 feet of 1.5-inch hose with a 95 GPM nozzle. Powered by a diesel engine, the P-25, and converted P-25A, hauls more than 800 gallons of water and 60 gallons of foam. Two operating fire trucks are required on the flight deck during flight operations. So essential is the fire truck that if it is not functioning, flight operations are halted. In addition to being used on aircraft carriers, the fire truck is used on amphibious assault ships with the possibility of being used on future vessels.Ī shipboard fire truck is an essential piece of equipment to extinguish a blaze or limit its severity until other systems can be activated. “We don’t have to procure a whole new truck and it is a lot less expensive to just revamp the one we have.”Īs a result of the conversion, it is redesigned as the P-25A Shipboard Fire Truck. “It saves the Navy time and money,” said Paul Scatko, project lead engineer. If you are having problems viewing the video, click here.Ĭalled a Conversion in Lieu of Procurement, or CILOP, revising or upgrading existing equipment with new parts is less expensive than building a new fire truck from the tires up. Those upgrades, which include newer, stronger engines, pumps and more, are being performed by Fleet Readiness Center - Aviation Support Equipment based at Solomons Island, Md., in cooperation with Naval Air Systems Command’s (NAVAIR) Common Aviation Support Equipment Program Office (PMA-260), as part of a scheduled rework, said Ken Sands, Non-Avionics Common Support Equipment Branch Head with PMA-260. Sailors will soon receive an upgraded tool to help fight maritime fires, as the Navy has begun upgrading its venerable P-25 Shipboard Fire Truck, a self-propelled vehicle designed for flight-deck use. Flight decks of aircraft carriers are busy places, and with limited escape accesses and confined spaces, they can be catastrophic if a fire breaks out. NAVAL AIR SYSTEMS COMMAND, PATUXENT RIVER, Md.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |